REASONS YOUR HOT WATER HEATER ISN'T WORKING

Reasons Your Hot Water Heater Isn't Working

Reasons Your Hot Water Heater Isn't Working

Blog Article

Request An Estimate

What are your thoughts concerning How to Troubleshoot and Repair an Electric Water Heater?


No Hot Water — Water Heater Repair
Several modern-day residences use an electric water heater for their heating unit, due to its ease and also convenience of use. Nonetheless, similar to any other electric devices, issues may arise with its usage, unexpectedly. It can be really frustrating to awaken to a cool shower as opposed to a warm one or having your bathroom with water that isn't hot sufficient or even too hot. Whatever the instance might be, water heater problems can be quite nerve-racking. The good news is, we have actually made a listing of possible remedies to your water heater problems. There are a number of variables that might cause many of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it taken care of should not posture excessive of an issue if you adhere to these steps:

Examine Your Power Supply:


As fundamental as this may appear, it is very essential. Without adequate power, your hot water heater will not operate. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the issue, merely transform it off and on once more. Replace any damaged or worn-out fuse. Examine the home appliance with power after these changes to see if it's currently working.

Examine the Heating Element in the Hot Water Heater:


If it's not a power issue, then attempt having a look at your burner if it is still working. Examine each of your burner to ensure the problem isn't with any one of them. If any of them is malfunctioning, replace that component and after that examine whether the hot water is back on.

Examine Your Thermostat:


If your water heater still isn't functioning or the water coming out isn't warm enough, you might need to examine the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the accessibility panel and also press the red button for temperature level reset above the thermostat. This must help heat up the water. Turn the circuit breaker back on and also check if the trouble has been solved.

Call A Specialist:


If after replacing all malfunctioning components and resetting your temperature level, the water heater still isn't working, you might need to get in touch with a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold faucets have actually been switched or it might be undersized for the quantity of hot water needed in your house. Whatever the case may be, an expert plumber would aid address the problem.

Final thought


Hot water heater problems are not always significant. Most of them are due to minor concerns like a blown fuse or damaged heating element. Replacing the malfunctioning components should work. Nevertheless, if you are still incapable to solve the problem, give a call to your nearby plumber ahead to get it dealt with.

8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


How to Troubleshoot and Repair an Electric Water Heater

As a passionate person who reads on No Hot Water — Water Heater Repair, I figured sharing that blog post was a smart idea. Enjoyed reading our blog? Please share it. Let someone else check it out. Thanks so much for going through it.




Information Here

Report this page